CME,CMM & CMM EFI Series

Designed for tough commercial applications, the CME, CMM and CMM EFI Series models in 5.5 and 7 kW (60 Hz), gasoline and LP vapor, are loaded with quality features. These include low noise, exceptionally low vibration, easy installation, diagnostic capability and digital regulation that allows voltage stability as loads change.

The CMM EFI is the first Electronic Fuel Injection genset in the industry.

These models are designed to consistently perform in applications where dependability and high quality power are essential. They're built to be the quietest in their class with exceptionally low vibration, and the enclosed muffler provides easy installation.

The advanced digital control provides extensive diagnostic capabilities by constantly monitoring the genset's operation and alerting the user to potential problems. It also assists the operator or service personnel in troubleshooting a variety of other operating conditions and service checks. Digital regulation allows voltage stability as loads change.

Standard Features

• Quietest and lowest vibration genset in its class
• Integrated hydraulic pump option
• Enclosed muffler for ease of installation
• Self-diagnostic capability to simplify troubleshooting
• Runs two air conditioners with power to spare
• Digital regulation for voltage stability as loads change
• Integrated housing design
• Two year Limited Warranty, five year drive warranty
• EFI Models
• First EFI (Electronic Fuel Injection) genset in its class
• EFI provides improved hot and cold start capability
• Electronic governor for voltage stability and frequency control

Contact your local branch for more information or to order.

CMHG Series

Onan's CMHG Series of hydraulic generators in 6, 8, 10 and 15 kW are designed as a fully-integrated power package. The CMHG Series is an engineered hydraulic generator system including the hydraulic pump, motor, generator, filtration system, oil cooler and reservoir in one complete, compact, and lightweight unit.

Onan's hydraulic generators start under full load and run at the rated output, giving you all the power and performance you’re paying for.

Features

• More standard features than any other hydraulic generator available
• High performance motor-starting capability for heavy loads
• Meets full load capability at 120° ambient conditions*
• Designed to provide clean, quiet power with low vibration
• Stainless steel housing
• Easy, single-side serviceability minimizes compartment space requirements
• Multiple air inlet locations for flexible installation and compact size offering several mounting options
• Onan-designed and manufactured alternator and voltage regulator
• Power on the fly through internal solenoid valve function
• All connections outside the housing
• Service and Support
• Warranty: 5 year, 1000 hours and 2 year, travel time and 2 hour/mileage allowance
• Largest worldwide service support network in the industry

*Ambient is defined as the air temperature measured at the cooling air inlet to the set

Contact your local branch for more information or to order.

CMSD Series

Designed for commercial applications, Onan's 6.0, 7.5 and 10.0 kW (50 and 60 Hz, single and three phase) Standard Series diesel gensets offer bullet-proof reliability and easy starting in severe weather conditions. Other features include emissions certification, focalized vibration isolation, and a two-year, 2000 hour limited warranty.

Features

• Smooth operation -- focalized mounting system with 4-point vibration isolation
• Glow plugs for reliable all-weather starting
• Installation flexibility with remountable 90° exhaust elbow and remountable DC control
• Multiple oil/fill check points for platform or compartment installations
• Cross-flow radiator for increased cooling efficiency
• Water resistant controls
• Low harmonic distortion for SCR loads
• Full flow lube oil filter
• Fuel filter/water separator
• Vertically mounted fuel and oil filters
• Replaceable element air cleaner
• 4-position exhaust elbow
• 30 A battery charging DC alternator
• Lifting bracket
• Base pan for drip control
• Electric fuel pump
• Brush type AC alternator
• 3 or 4 cylinder diesel engine

Contact your local branch for more information or to order.

CMQD

The CMQD Quiet Diesel Series in 5.5, 7.5, 10.0 and 12.0 kW (5.5 CMQD is available in 50 Hz and 3 phase) are the heavy-duty choice when low noise and low vibration are required. Their revolutionary design makes these gensets up to 15 dB(A) quieter than other diesel-powered generators, and quieter than most gasoline sets. The unit is totally enclosed, including cooling, exhaust, and intake systems.

Standard Features

• Dramatically lower noise, vibration, harshness (NVH)
• Up to 15 dB(A) quieter than conventional diesel generators
• Enclosed muffler for added quietness, easy installation
• Automatic glow plug eliminates preheat time uncertainty
• Self-diagnostic capability simplifies troubleshooting
• Pure sine wave output for quality power
• Convenient, top-mounted switches and coolant level check/fills
• Complete, integrated package for easy, low-cost installation
• Service and maintenance points accessible through easy-latch side service door
• Sound attenuated housing with cooling air inlet and outlet ducts
• UV Resistant paint/water resistant controls
• Integral enclosed muffler with stationary exhaust pipe connection point
• USDA approved spark arrestor muffler
• Internal radiator
• Intake silencer
• Heavy-duty air cleaner
• Fused DC circuits

Contact your local branch for more information or to order.

Protec PTO

Onan's Protec PTO generator models from 12-40 kW (50 and 60 Hz, single and three phase) are specifically engineered for mobile emergency vehicle use with a field-proven design for high performance and long life. Features include various mounting configurations, bi-directional rotation with radial fan, and remote mountable, solid state electronic voltage regulator. A five-year warranty is standard.

Features

• Heavy-duty, field-proven design for long life
• Capped voltage regulation
• Environmental protection for adverse conditions
• Low harmonic distortion
• Dual mounting configurations
• Remote mountable solid state electronic voltage regulator
• 50/60 Hz switchable
• Precision balanced rotating field generator
• Epoxy impregnated windings with overcoat
• Brushless exciter
• Double-sealed, prelubricated bearings
• Air-cooled with shaft-mounted centrifugal fan
• Bi-directional rotation
• Skewed stator for low harmonic distortion
• Class H insulation, 180° C temperature rating
• Reconnectable three phase and single phase

Contact your local branch for more information or to order.